VIGILANT
MANUAL PULL STATIONS
|
Part Number
|
Part Description
|
PDF File
|
|
Manual Pull Stations
|
||
|
GSA-M270
|
Manual Pull Station - Single Action, 1 Stage.
|
|
|
GSA-M270P
|
Manual Pull Station - Single Action, 2 Stage.
|
|
|
276-K2
|
GA Key for SIGA-270P 2 stage station.
|
|
|
GSA-M278
|
Double action fire alarm station.
|
SMOKE DETECTORS
|
Part Number
|
Part Description
|
PDF File
|
|
Smoke Detectors
|
||
|
V-PHS
|
Intelligent Analog Photoelectric and Thermal Multisensor Detector.
|
|
|
V-PS
|
Intelligent Analog Photoelectric Smoke Detector.
|
|
Part Number
|
Part Description
|
PDF File
|
|
Smoke Detectors
|
||
|
B4U
|
Detector Base - standard for 4" square box.
|
|
|
RB4U
|
Detector Base with Form "C" Relay - for 4" square box.
|
|
|
SB4U
|
Audible (Sounder) Base, Mounts to 4" sqaure (2 1/8" deep) North American electrical box.
|
|
|
IB4U
|
Detector Base with Isolator - for 4" square box.
|
|
|
AB4G-SB
|
Surface Box for Sounder Base - (use with SB4U models only).
|
|
|
211G
|
Replacement Optical Chambers - (package of 10).
|
|
|
RLED
|
Remote Alarm LED, use with standard base only.
|
|
|
GSA-IPHS
|
4D Multisensor Detector.
|
|
|
GSA-IS
|
Intelligent Ionization Detector UL/ULC listed.
|
|
|
GSA-SB
|
Detector Mounting Base, standard.
|
|
|
GSA-SB4
|
4" Detector Mounting Base c/w GSA-TS4 Trim Skirt.
|
|
|
GSA-RB
|
Detector Mounting Base with Relay.
|
|
|
GSA-RB4
|
4" Detector Mounting Base with Relay, c/w GSA-TS4 Trim Skirt.
|
|
|
GSA-IB
|
Detector Mounting Base with Fault Isolator.
|
|
|
GSA-IB4
|
4" Detector Mounting Base with Fault Isolator, c/w GSA-TS4 Trim Skirt.
|
|
|
GSA-AB4G
|
Audible Sounder Base.
|
HEAT DETECTORS
|
Part Number
|
Part Description
|
PDF File
|
|
Heat Detectors
|
||
|
V-HRD
|
Intelligent Analog Fixed Temperature / Rate-of-rise Heat Detector, 135F, 15F per minute.
|
|
|
V-HFD
|
Intelligent Analog Fixed Temperature Heat Detector - 135F.
|
|
|
GSA-HFS
|
Intelligent Fixed Temperature Heat Detector - UL/ULC Listed.
|
|
|
GSA-HRS
|
Intelligent Fixed Temperature/Rate-of-rise Heat Detector UL/ULC Listed.
|
DUCT SMOKE DETECTORS
|
Part Number
|
Part Description
|
PDF File
|
|
Duct Smoke Detectors
|
||
|
GSA-SD
|
SuperDuct GSA Duct Smoke Detector.
|
|
|
SD-T8
|
SuperDuct, Air sample tube 8".
|
|
|
SD-T18
|
SuperDuct, Air sample tube 18".
|
|
|
SD-T24
|
SuperDuct, Air sample tube 24".
|
|
|
SD-T36
|
SuperDuct, Air sample tube 36".
|
|
|
SD-T42
|
SuperDuct, Air sample tube 42".
|
|
|
SD-T60
|
SuperDuct, Air sample tube 60".
|
|
|
SD-T78
|
SuperDuct, Air sample tube 78".
|
|
|
SD-T120
|
SuperDuct, Air sample tube 120".
|
|
|
EC-LED
|
Remote Alarm LED Indicator.
|
MIRCOM
MANUAL PULL STATIONS
| MS-401AD | Intelligent Addressable Single Stage Pull Station. |
| MS-402AD | Intelligent Addressable Dual Stage Pull Station. |
| MS-407AD | Intelligent Addressable Single Stage Pull Station with additional N.C. Switch. |
LOW PROFILE SENSORS
|
MIX-M500M
|
Intelligent Addressable Monitor Module - provides an address for a group of normally open initiating devices, such as heat detectors, beam smoke detectors, 4 wire smoke detectors, waterflow switches, manual pull stations, etc. |
|
MIX-M500DM
|
Intelligent Addressable Dual Monitor Module - provides two independent 2 wire initiating device circuits at two seperate, consecutive addresses, Monitors two seperate Class B Circuits, Ideal for water flow & tamper switch monitoring. |
|
MIX-M502M
|
Intelligent Addressable Interface Module - provides the same features as the MIX-M500M, but also allows for the use of multiple, conventional 2-wire smoke detectors in the circuit, Requires a resettable signal power source. |
|
MIX-M501M
|
Intelligent Addressable Mini Monitor Module - provides an address for a group of Normally Open Initiating devices, such as Heat detectors, projected beam smoke detectors, 4 wire smoke detectors, waterflow switches, manual pull stations, etc. |
|
MIX-M500S
|
Intelligent Addressable Supervised Control Module - provides supervised monitoring of wiring to signal devices that require an external power supply to operate, such as horns, strobes, bells or speaker isolators Conventional signals will require a 24 Vdc power source and speakers will require an audio input. Does not supervise power source, a relay is required. |
|
MIX-M500R
|
Intelligent Addressable Relay Module - connects to the same loop as the initiating devices and provides two isolated sets of Form-C contacts. Module allows the FX-2000 to switch these contacts on comand. |
|
M500X
|
Fault Isolator Module - Used to protect the system against wire-to-wire short circuits on the analog loop, In the event of a short circuit between any two fault isolator modules, both modules immediately switch to an open circuit condition and isolate any group of sensors between them (Must be wired in Class A). |
SENSOR BASES
|
B501
|
Flangeless Mounting Base - standard base with no flange. |
|
B501BH
|
Sounder Base - provides a built in sounder - Can be used for evacuation purposes. |
|
B210LP
|
Flanged Mounting Base - Low Profile mounting base with a flange. |
|
B224RB
|
Relay Base - provides one Form C relay cantact for control of Aux functions. |
|
B224BI
|
Isolator Base - allows loops to continue to operate under fault conditions. |
DUCT SMOKE DETECTORS
|
MIX-DH200P
|
Innovair Intelligent Photoelectric Non-Relay Duct Smoke Detector. |
|
MIX-DH200RP
|
Innovair Intelligent Photoelectric With Relay Duct Smoke Detector. |
|
ST-3
|
Metal sampling tube duct 2' - 4'. |
|
ST-5
|
Metal sampling tube duct 4' - 8'. |
|
ST-10
|
Metal sampling tube duct 8' - 12'. |
|
RA-400Z
|
Remote Annunciator. |
|
RTS-451
|
Remote Test Station. |
© A+ Fire and Security Ltd.