VIGILANT
|
Part Number
|
Part Description
|
PDF File
|
|
Addressable Input / Output Modules
|
||
|
235196P
|
Transient Protector - for bell and horn circuits. Provides transient protection to - CC1,
CC2, MCC2, UM, and MAB Modules. |
|
|
GSA-CC1
|
Single Inuput (Riser) Module. Features a built in RING TONE Generator, use for
switching a single signal or audio circuit. |
|
|
GSA-CC1S
|
Single Inuput (Riser) Module. Features a built in RING TONE Generator, use for
switching a single signal or audio circuit. Also includes Strobe Synchronization. |
|
|
GSA-CR
|
Control Relay Module. Select for either N.O. or N. C. Operation. Rated at 2 Amps/
24Vdc. |
|
|
GSA-CRR
|
Polarity Reversal Relay Module. Reverses polarity of 24Vdc to sound a group of audible
bases. |
|
|
GSA-CT1
|
Single Input Module. Single circuit input module for use with Normally Open Contact
Devices. Four selectable personality codes for alarm latching, alarm delaying latching, non latching monitor, or latching supervisory. |
|
|
GSA-CT2
|
Dual Input Module. Two Circuit Input Module for use with Normally Open Contact
Devices Four selectable personality codes on each cicuit for alarm latching, alarm delaying latching, non latching monitor,or latching supervisory. |
|
|
GSA-IM
|
Isolator Module. Use to isolate wiring faults on Class A - (style 7) loops.
|
|
|
GSA-MAB
|
Universal Class A/B Module - UIO Mount.
|
|
|
GSA-MCC1
|
Single Inuput (Riser) Module - UIO Mount.
|
|
|
GSA-MCC1S
|
Single Inuput (Riser) Module, UIO Mount. Also includes Strobe Synchronization.
|
|
|
GSA-MCR
|
Control Relay Module- UIO Mount.
|
|
|
GSA-MCRR
|
Polarity Reversal Relay Module - UIO Mount.
|
|
|
GSA-MCT2
|
Dual Input Module - UIO Mount.
|
|
|
GSA-MP1
|
GSA Module Mounting Plate, 1 footprint. Space for up to four 2 gang GSA Modules
or, eight 1 gang GSA Modules. |
|
|
GSA-MP2
|
GSA Module Mounting Plate, 1/2 footprint. Space for up to two 2 gang GSA Modules
or four 1 gang GSA Modules. |
|
|
GSA-MP2L
|
GSA Module Mounting Plate, 1/2 extended footprint. Space for up to three 2 gang GSA
Modules, or six 1 gang GSA Modules. |
|
|
GSA-UIO2R
|
Universal Input/output Module Motherboard - 2 Position w/Riser selection. Use for M
Series Modules. |
|
|
GSA-UIO6R
|
Universal Input/output Module Motherboard - 6 Position w/Riser selection. Use for M
Series Modules. |
|
|
GSA-UIO6
|
Universal Input/output Module Motherboard - 6 Position, use for M Series Modules.
|
|
|
GSA-UM
|
Universal Class A/B Module. Select from 15 personality codes including Class A or
Class B Initiating circuits, Class A or B signalling circuits. |
|
|
GSA-WTM
|
Combination Water flow / Tamper Module. Two circuit input module for use with
Normally Open Contact Devices.The first circuit is factory programmed latch as an alarm after a contact closure of 16 seconds in duration. The second input will latch as a Supervisory input upon closure of a Normally Open Contact. |
|
|
MFC-A
|
Multifunction Fire Cabinet - 8" x 14" x 3.5" Red. Supports one MP1, two MP2 GSA
Mounting Plates, or one URSM, or one UIO2R, one UIO6, or one UIO6R GSA plug in module motherboards, or one REL GSA Releasing Module. |
|
|
GSA-IO
|
Input / Output Module.
|
|
|
GSA-MB4
|
Module Mounting Bracket kit for two single gang Modules in a 4" square box.
|
|
|
GSA-MDM
|
Digital Message Module - UIO Mount.
|
|
|
GSA-MIO
|
Input / Output Module - UIO Mount.
|
|
|
GSA-MRM1
|
Riser Monitor Module - UIO Mount, monitors one Riser.
|
|
|
GSA-CC2
|
Dual Input Riser Module - Use for switching (selecting) either of two signal or audio
input circuits to one signal output circuit. |
|
|
GSA-MCC2
|
Dual Input Riser Module - UIO Mount.
|
|
|
GSA-REL
|
Signature Releasing Module.
|
|
|
GSA-RM1
|
Riser Monitor Module - Monitors 1 Riser.
|
MIRCOM
|
MIX-M500M
|
Intelligent Addressable Monitor Module - provides an address for a group of normally open initiating devices, such as heat detectors, beam smoke detectors, 4 wire smoke detectors, waterflow switches, manual pull stations, etc. |
|
MIX-M500DM
|
Intelligent Addressable Dual Monitor Module - provides two independent 2 wire initiating device circuits at two seperate, consecutive addresses, Monitors two seperate Class B Circuits, Ideal for water flow & tamper switch monitoring. |
|
MIX-M502M
|
Intelligent Addressable Interface Module - provides the same features as the MIX-M500M, but also allows for the use of multiple, conventional 2-wire smoke detectors in the circuit, Requires a resettable signal power source. |
|
MIX-M501M
|
Intelligent Addressable Mini Monitor Module - provides an address for a group of Normally Open Initiating devices such as Heat detectors, projected beam smoke detectors, 4 wire smoke detectors, waterflow switches, manual pull stations, etc. |
|
MIX-M500S
|
Intelligent Addressable Supervised Control Module - provides supervised monitoring of wiring to signal devices that require an external power supply to operate, such as horns, strobes, bells or speaker isolatorsConventional signals will require a 24 Vdc power source and speakers will require an audio input - Doesnot supervise power source, a relay is required. |
|
MIX-M500R
|
Intelligent Addressable Relay Module - connects to the same loop as the initiating devices and provides two isolated sets of Form-C contacts. Module allows the FX-2000 to switch these contacts on comand. |
|
M500X
|
Fault Isolator Module - Used to protect the system against wire-to-wire short circuits on the analog loop, In the event of a short circuit between any two fault isolator modules, both modules immediately switch to an open circuit condition and isolate any group of sensors between them (Must be wired in Class A). |
| CR-6 | Six Relay Control Module - Consists of six Form-C relays. |
| SC-6 | Six Supervised Control Module - provides supervised monitoring of wiring to load devices that require an external power supply or amplifier to operate. |
| CZ-6 | Six Zone Interface Module - provides an interface between the intelligent alarm system and a two-wire conventional detection zone. |
© A+ Fire and Security Ltd.